Release
3.5.0
Editor
Tornos SA
Operating System
  • Windows 7
  • Windows 8 & 8.1
  • Windows 10

TISIS

Tornos Iso Swiss Integrated Solution

WARNING : Update from version 1.x or 2.x to version 3.0 is billable


IMPORTANT: Compatibility with Motion Control


It is essential to perform the software updates on the machine, i.e. the Connectivity Pack and Motion Control according to the following versions:

  • Connectivity pack: 2.5
  • SwissNano 4 Motion Control: 803
  • SwissNano 4 V2 Motion Control: 1009
  • SwissNano 7 Motion Control: 909
  • Swiss ST26 Motion Control: 28M
  • Swiss CT20 Motion Control: 803
  • Swiss GT13, GT26 & GT32 Motion Control: 803
  • Swiss DT13 & DT26 Motion Control: 803
  • SwissDT26S Motion Control: 909
  • SwissDT13e, SwissDT26/5 & SwissDT26/6 Motion Control: 1009
  • EvoDECO 10, 16, 20 & 32 Motion Control: 803
  • EvoDECO 10,16, 20 & 32 Optimove Motion Control : 909
  • SwissDECO 36 G, T & TB Motion Control: 909
  • SwissDECO 36 ISO G, T & TB Motion Control: 1009

Please contact Tornos after-sales service for a motion control update.

TISIS

Novelties

  • SwissDT26/5 ISO C
  • SwissDT26/6 ISO C
  • ACBPlus (Active Chip Breaker)
  • Show threading 2D simulation
  • Change phone activation by email activation
  • Filter for B axis type (interpolate or positioning) and remove information BI/BP
  • 2D simulation with machine positions

Improvements

  • Improve time estimation for whirlering
  • Replace GoTo Assist by Zoho Asssit

Bugs fixes

  • Fix bug in inclined plan
  • Fix ressource line for M115 code
  • Fix bugs in transmit mode
  • Fix bug on opening part program without machine type
  • Fix bug in Post Processing
  • Fix bug in user edition (user right)
  • Fix tool geometry in printing

Machines

All machines:

  • Fix P parameter unit in G4 function

Optimove machines:

  • G901 function (self-adjusting guidebush) is available in all channels
  • Move compilation M241 Mx Mx only in channel 1 (for bug SBFi with cut on channel 2)
  • G954 fix case argument M not programmed and argument H different than 0 (avoid alarm)
  • Correction feedrate management in thread whirling (M115 ; G1 Z_ C_)

EvoDECO Optimove:

  • Move M60 in template cutter on gang 2 in channel 1 (for bug SBFi with cut on channel 2)
  • Correction if #553 (end bar position) is input in negative (SBFi)
  • Adaptation default admissible part length error value with SBF (# 556) 1mm instead of 0.2

EvoDECO20 and EvoDECO32 Optimove:

  • Correction formula X pressetter mode on T4x and T5x
  • G902 : check sensor only if gripper is selected in #548 (or void)
  • G923: check presence part only if gripper is selected in #548 (or void)
  • Add M codes M261 M2 M0/M1/M2/M3

SwissDECO36:

  • Updated the tool locations for the Thread Whirler tool holder N°248604. It uses 3 positions

SwissDECO36 TB Optimove:

  • Fix soft limit of B axis

SwissNano 7:

  • Add new article N°249136 : Support with 2 rotating tools;1 axial and 1 cross drill

SwissGT13:

  • Change the default value to Z 63 mm for tool holder N°389298 : Frontwork base 4 fixed toolholders

SwissGT32:

  • Change the default values in Z for article support N°391411: Frontwork base 4 fixed toolholders and remove PF26

SwissGT26 B axis V2 and SwissGT32 B axis V2:

  • Fix machine coordinate on Z axis

CT20:

  • Fix maximal spindle speed S1 (10'000)

TISIS Pilot

TISIS novelties are included in TISIS Pilot (See above)

Novelties

  • MDI operation with parameter
  • Import/export for MDI operations
  • Configuration page for part ejector

Improvements

  • Improve opening large program part

Bugs fixes

  • Fix status information of guidebush for EvoDECO
  • Fix axis selection in JOG mode Jog for SwissDECO ISO
  • Fix program part transfert for SwissDECO machine

Features

Transfer of part programs onto the machine via the network (Connectivity Pack Option)

Transfer of tool catalogue (items) onto the machine via the network (Connectivity Pack Option)

PROGRAMMING

  • Simplified display of part information
  • Vertical ISO code editor with syntax colouring
  • Part models and multilingual application
  • Synchronised ISO code display fluidity
  • Checking synchronisation errors
  • Print usual documents
  • File comparator
  • Calculation of the part duration and display of the time diagram
  • Programming help (ISO code)
  • Program edition from Gantt diagram

TOOL CATALOG

  • Simplified management of items/tool supports with graphical representation
  • Management of item/tool support incompatibilities
  • Default values of tool geometries
  • Simplified view of tools per channel
  • Assured compatibility of tool support (items) files (TAP extension) of machine tools.
  • Addition of new tool supports (items) via TSPK external file(s).

MONITORING (with connectivity pack)

  • View of complete machine fleet according to the machine type with the possibility to sort the displays:
    • Machine status (machine lamp copy)
    • Machines at end of production
  • View of production in progress for each machine:
    • Part counter, remaining production time and part name
    • Alarms and/or active messages
    • Part library with drawing and part op plan, images & documents for setup

PROBLEM(S)

If you had to encounter problem with the TISIS software, please use the mail address below:

Email : tisis-hotline@tornos.com. In order to reproduce the problem, we kindly ask you to give as many information as you can.

REQUEST(S) OR NEWS

Please use the email address tisis-feedback@tornos.com if you've got specific request (internal or external) about TISIS software